Checked against the XP4 owner manual and reports from XP4 owners.
For the Lectric XP4
The XP4 is unusual among folding e-bikes in that it arrives with a rear rack already bolted on and rated to carry 150 lbs, so the question is almost never which rack to buy. It is what to put on top of the one you have, and whether anything can go up front. That turns out to be a shorter list than the generic roundups suggest, because the XP4 frame changed from the earlier XP models and some accessories that owners recommend for an XP 3.0 no longer line up. Below are the carriers that are actually documented to fit, what each one mounts to, and the two problems owners have run into that you will not find on a product page. Every claim links to where it came from, whether that is the owner manual or a rider who bolted the thing on themselves.
Updated Jul 26, 2026 · Researched from manufacturer specifications and owner reports; every claim on this page links to its source.
As an Amazon Associate I earn from qualifying purchases. How this works
The only carriers Lectric documents as fitting the XP4, front and rear, with hardware designed around the bike instead of adapted to it. If you want one decision rather than a research project, this is it.
Lectric XP4 · rear rack and head tube
Ranked by fit confidence
| Racks and baskets | Mount | Front basket capacity | Fitment | |
|---|---|---|---|---|
Lectric Front and Rear Basket Cargo Package Best overall | Head tube bolt-on, plus rear rack | 30 lbs | Fits.Bolt-on | Check on Amazon |
Lectric LevelUp Rack Best for quick-release | Detachable, with quick-release accessory bar | 150 lbs | Fits.Bolt-on | Check on Lectric eBikes |
SAMRELAX Rear Bike Basket Best for folders | Rear rack, quick mount optional | — | Fits.Bolt-on | Check on Amazon |
 Lectric Front Basket Front only | Head tube bolt-on | 30 lbs | Fits.Bolt-on | Check on Lectric eBikes |
The only carriers Lectric documents as fitting the XP4, front and rear, with hardware designed around the bike instead of adapted to it. If you want one decision rather than a research project, this is it.
The most XP4-specific carrier Lectric makes: detachable, with a Yepp window and an accessory bar that quick-release bags clip to, and a torque figure in the owner manual for its bolts.
Install note
Lectric builds and sells this specifically for the XP4, and the owner manual carries a torque figure for its mounting bolts, so the fit is documented on both sides. The accessory bar is the part that matters here: it gives quick-release bags something to clip to, which is exactly what the bare XP4 frame no longer offers a strap.
Light enough that an owner who folds the XP4 regularly picked it over the branded basket, and it comes off in about a minute once you add a quick mount. Inspect it for rattles when it arrives.
Install note
An XP4 owner runs this on the integrated rack and rates it for anyone who folds the bike, since a third-party quick mount takes it off in about a minute. Check it on arrival: one buyer in the same thread reports a bad rattle from welding debris left inside the tubing, which another owner cured by drilling a small hole to shake the debris out.
Worth buying alone if the rear rack already does everything you need and you only want somewhere to drop a bag up front. Same head tube mount as the package, so the same steering caveat applies.
Install note
Bolts to the head tube. Worth knowing before you buy: because it is fixed to the frame, the load does not steer with the front wheel. Riders who expect a fork-mounted basket find that surprising at first.
Three things decide whether a carrier works on this bike.
We have not found a documented fit for hook-style panniers, such as the Ortlieb QL system, on the XP4 rack. Owners ask about it regularly and nobody in the threads we read has measured the tubing. Rather than guess from a number published for a different model, we have left it out. If you have fitted a set, tell us and we will add it with your report as the source.
No. It ships with one already fitted, rated to carry 150 lbs, which is why this guide covers baskets and carriers rather than replacement racks.
Often not. XP4 owners report that the velcro back straps line up with nothing, because the XP4 frame no longer has the vertical bar running up to the rear rack that those straps wrapped around on earlier models.
No. It bolts to the head tube, so it stays square with the frame while the wheel steers underneath it. Riders expecting a fork-mounted basket usually notice this on the first ride.
The owner manual specifies 4-5 Nm for the rack accessory bolts. They are small fasteners and easy to strip, so a torque wrench is worth the trouble.
Every category, every accessory, checked against the same specs.