For the Bambu Lab H2D

Bambu Lab H2D Build Plates: What Fits

The build plate is where the H2D catches people out, because the aisle is full of Bambu Lab plates and most of them are for a different machine. Bambu sells far more X1, P1 and A1 printers than H2D units, and those share a 256 x 256 mm bed. The H2D bed is much larger, with a 350 x 320 mm print area, so a plate cut for the popular smaller printers simply does not cover it.

That single fact sorts the category. A plate that names the H2D or the H2S is cut for this bed; a plate that names the X1 Carbon or the P1S is not, however similar the listings look. The H2S shares the H2D bed, so the two are one buying decision, while the H2C Vortek is a different bed and is out of scope here. Bambu publishes the print area; it publishes nothing about any third-party plate, so every fit below is the seller stating it, read off the listing on the date shown and checked against Bambu's bed rather than taken on faith.

Updated Aug 2, 2026 · Researched from manufacturer specifications and owner reports; every claim on this page links to its source.
As an Amazon Associate I earn from qualifying purchases. How this works

Our pick01 / 04

BIQU CryoGrip Pro Glacier Build Plate for H2D/H2S

The deepest-reviewed plate that names the H2D and H2S, a double-sided sheet built for low-temperature release that states a print area matching the machine bed.

Check price on Amazon

Fitment check

Sourced

Bambu Lab H2D · the heated bed

Fits. Plates naming the H2D or H2S — cut for the 350 x 320 mm print area this machine uses
Does not fit. Plates for the X1, P1 or A1 — those beds are 256 x 256 mm, too small to cover the H2D
Note. Steel-sheet outline vs print area — sheets read 355 x 346.5 mm; the bed print area is 350 x 320 mm
Fits. The H2S shares this bed — an H2D plate fits the H2S; Bambu builds them on the same bed
Conditional fit. The H2C is a different bed — do not put an H2D plate on the H2C Vortek
Conditional fit. Not verified in-house — we printed on none of these; every fit is the sellers claim

Checked Aug 2, 2026 · source 1

All 4 build plates, compared

Ranked by fit confidence

Build plates compared by fitment
Build plates	Fitment
BIQU CryoGrip Pro Glacier Build Plate for H2D/H2S Our pick	Fits.Bolt-on	Check on Amazon
Ideaformer Textured PEI Build Plate for H2D/H2S Textured PEI	Fits.Bolt-on	Check on Amazon
AJOYIB Cool Build Plate for H2D/H2S Smooth cool plate	Fits.Bolt-on	Check on Amazon
AIYANQI Double-Sided Smooth PEI Plate for H2D/H2S Pick 4	Fits.Bolt-on	Check on Amazon

BIQU CryoGrip Pro Glacier Build Plate for H2D/H2S

Our pick

—

Bolt-on

Check on Amazon

Ideaformer Textured PEI Build Plate for H2D/H2S

Textured PEI

—

Bolt-on

Check on Amazon

AJOYIB Cool Build Plate for H2D/H2S

Smooth cool plate

—

Bolt-on

Check on Amazon

AIYANQI Double-Sided Smooth PEI Plate for H2D/H2S

Pick 4

—

Bolt-on

Check on Amazon

The reviews

Our pick01

BIQU CryoGrip Pro Glacier Build Plate for H2D/H2S

The deepest-reviewed plate that names the H2D and H2S, a double-sided sheet built for low-temperature release that states a print area matching the machine bed.

Fits Bambu Lab H2D

Install note

Opened and read back on 2026-08-02: "BIQU CryoGrip Pro Glacier Build Plate for Bambu-Lab H2D H2S 3D Printers | Low Temperature Printing, Double-Sided Spring Steel Sheet, Print Area 350x320", BIGTREETECH byline, In Stock, 823 ratings. Seller-stated fit, and the sourced check is Bambu's: the stated 350 x 320 mm print area matches the H2D bed, and a plate cut for the 256 x 256 mm X1, P1 or A1 bed would not cover it.

official

Check on Amazon

Textured PEI02

Ideaformer Textured PEI Build Plate for H2D/H2S

The textured option, for the matte bottom and higher grip, with a QR code the machine reads and a title that names the H2D and H2S Combo directly.

Fits Bambu Lab H2D

Install note

Opened and read back on 2026-08-02: "H2D H2S PEI Sheet with QR Code for Bambu Lab 355x346mm, Textured PEI Build Plate for Bambu Labs H2D H2S Combo", Ideaformer official store byline, In Stock. Seller-stated fit; the 355 x 346.5 mm figure is the steel-sheet outline, which sits over the H2D 350 x 320 mm print area Bambu publishes.

official

Check on Amazon

Smooth cool plate03

AJOYIB Cool Build Plate for H2D/H2S

A smooth high-viscosity cool plate for materials that print cool, the glossy-finish counterpart to the textured sheet, sized for the H2S and H2D bed.

Fits Bambu Lab H2D

Install note

Opened and read back on 2026-08-02: "355x346mm Large Cool Build Plate for Bambu Lab H2S H2D Smooth High-Viscosity Spring Steel Print Bed Surface", AJOYIB STORE byline, In Stock. Seller-stated fit against the H2D/H2S bed; the sheet outline is 355 x 346.5 mm over the published 350 x 320 mm print area.

official

Check on Amazon

Pick 404

AIYANQI Double-Sided Smooth PEI Plate for H2D/H2S

A double-sided smooth PEI sheet, so you get two smooth faces to alternate as one wears. It names the H2S, H2D and H2D Combo and states the same large sheet size as the others here; the newest of the four and the lightest on feedback, which is worth knowing before you trust it.

Fits Bambu Lab H2D

Install note

Opened and read back on 2026-08-02: "Bamboo Lab H2S H2D 3D Printer Double Sided Smooth PEI Build Plate 346x355mm, Double Sided Smooth Spring Steel Plate for Bambu Lab H2S, H2D, H2D Combo", AIYANQI byline, In Stock. Seller-stated fit against the H2D/H2S bed, the 355 x 346.5 mm sheet over the 350 x 320 mm print area.

official

Check on Amazon

What to check before you buy

The size question comes first, then the surface.

Name, not looks. Buy a plate whose title says H2D or H2S. A plate for the X1, P1 or A1 is a different bed and will not cover this one.
Print area, not sheet outline. The steel sheets read around 355 x 346.5 mm; the number that matters is that they cover the H2D's 350 x 320 mm print area.
Textured or smooth. Textured PEI grips harder and leaves a matte bottom; smooth PEI leaves a glossy one and releases differently. This is preference, not fit.
A cool plate is for cool-printing materials. It is a surface choice, not a size choice.
The H2S owner buys the same plate. The two machines share the bed. The H2C does not, so do not carry a plate across to it.

Why an X1 or P1 plate will not work

This is the whole category in one comparison. Bambu builds the X1, P1 and A1 around a 256 x 256 mm bed, and it builds the H2D around a 350 x 320 mm print area. A plate is a flat sheet sized to a bed, so a 256 mm sheet cannot cover a 350 mm bed. The listings for the smaller plates often outnumber the H2D ones and read almost identically, which is exactly why the mistake is common.

The safe rule is the model name. The plates on this page all name the H2D and H2S and state a sheet size in the mid 350s, which sits over the published print area. Anything naming only the X1 Carbon, the P1S or the A1 is for the small bed no matter how good the reviews are.

What we could not verify

We have not printed on any of these plates. Bambu publishes the bed and the print area; it publishes nothing about a third-party sheet, so the adhesion claims and the exact sheet dimensions are the sellers, read off the listing on the date shown. If a plate seats or releases differently than its listing says, tell us and we will publish your report as the source.

Questions owners ask

Will a Bambu X1 or P1 build plate fit the H2D?

No. The X1, P1 and A1 share a 256 x 256 mm bed, and the H2D has a 350 x 320 mm print area. A plate cut for the smaller bed cannot cover the H2D. Buy a plate whose title names the H2D or H2S.

Is an H2D plate the same as an H2S plate?

Yes. Bambu builds the H2D and H2S on the same bed, so a plate for one fits the other. The sellers list them together for that reason. The H2C Vortek is a different bed and is the exception.

Why do the plates say 355 x 346.5 mm and not 350 x 320 mm?

The larger number is the steel-sheet outline; the smaller one is the bed's heated print area that Bambu publishes. The sheet sits over the print area, so both can be true. Match on the model name and the print area, not the sheet outline.

Still kitting out the Bambu Lab H2D?

Every category, every accessory, checked against the same specs.

See all Bambu Lab H2D accessories